大豆脲酶诱导碳酸钙沉淀的多因素影响分析

本文探究了多个影响因素对大豆脲酶诱导碳酸钙沉淀(SICP)的影响,以优选出主要影响因素并提供其最佳范围。首先分析了脲酶浓度和温度对脲酶活性的影响;之后通过正交实验设计,进行25种工况的SICP水溶液实验,研究不同因素组合下Ca²⁺利用率的变化规律;最后借助扫描电子显微镜观测不同工况下生成碳酸钙的形态。结果表明:低温有利于脲酶的保存及活性发挥,5 ℃时脲酶活性能保持21 d以上;同一温度下,脲酶浓度越大,脲酶初始活性越高,脲酶完全失活所需时间越短。pH值、脲酶与胶结液体积比是影响Ca²⁺利用率的主要因素。为达到较高的Ca²⁺利用率,脲酶和胶结液最佳体积比为1,氯化钙与尿素最佳浓度比为1.5,Ca²⁺最佳浓度为1 mol/L。当脲酶浓度较低时生成的六面体状碳酸钙较多;随着脲酶浓度的增大,所沉淀的碳酸钙向球形转变。大豆中富含的天冬氨酸是控制碳酸钙形态的重要因素。     

Simultaneous Removal of Antibiotics and Heavy Metals with Poly(Aspartic Acid)-Based Fenton Micromotors

The discharge of diverse pollutants has led to a complex water environment and posed a huge health threat to humans and animals. Self-propelled micromotors have recently attracted considerable attention for efficient water remediation due to their strong localized mass transfer effect. However, a single functionalized component is difficult to tackle with multiple contaminants and requires to combine different decontamination effects together. Here, we introduced a multifunctional micromotor to implement the adsorption and degradation roles simultaneously by integrating the poly(aspartic acid) (PASP) adsorbent with a MnO₂-based catalyst. The as-prepared micromotors are well propelled in contaminated waters by MnO₂ catalyzing hydrogen peroxide. In addition, the catalytic ramsdellite MnO₂(R-MnO₂) inner layer is decorated with Fe₂O₃ nanoparticles to improve their catalytic performance, contributing to an excellent degradation ability with 90% tetracycline (TC) removal in 50 minutes by enhanced Fenton-like reactions. Combining the attractive adsorption capability of poly (aspartic acid) (PASP), the composite micromotors offer an efficient removal of heavy metal ions in short time. Moreover, the designed micromotors are able to simultaneously remove antibiotic and heavy metals in mixed contaminants circumstance just in single treatment. This multifunctional micromotor with distinctive decontamination ability exhibits a promising prospective in treating multiple pollutants in the future.     

Metabolomics techniques applied in the investigation of phenolic acids from the agro-industrial by-product of Carapa guianensis Aubl

Processing of Carapa guianensis seeds to obtain oil on an industrial scale generates a significant amount of by-product, approximately 66% w/w, which is called cake and is a potential source of biomolecules, including simple phenolic structures. For this reason, studies were carried out on the chemical profiles of hydrolyzed extract from this agro-industrial by-product through High Performance Thin-Layer Chromatography (HPTLC) and Gas Chromatography coupled to Mass Spectrometry (GC–MS). These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product. The sample antioxidant capacity was determined by methods of 2,2-diphenyl-1-picrylhydrazyl (DPPH)and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS⁺) radicals direct sequestration. The hydrolyzed fraction showed a total of 63.47% in the relative abundance of the total of compounds, standing out: p-hydroxybenzoic acid (39.19%) and protocatechuic acid (3,4-dihydroxybenzoic acid) (5.62%), both from hydroxybenzoic acids and 3-(3,4-dihydroxyphenyl)lactic acid, (7.76%) hydroxycinnamic acids derivatives. In these results, the fraction rich in simple phenolic acids was obtained, attributing the prominent behavior of this matrix antioxidant activity, expressed by (IC₅₀: of 16.42 µg/mL and 6.52 µg/mL for DPPH and ABTS⁺ radicals, respectively). The research demonstrated an alternative to applicability that involves sustainability from agro-industrial. These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product, generating a process capable of converting biomass into a bioproduct, consisting of bioactive compounds, in addition to adding value to the industrial chain.     

An organoantimony nitrate complex with azastibocine framework as water tolerant Lewis acid catalyst for the synthesis of 1,2-disubstitued benzimidazoles

A novel organoantimony complex of 6-cyclohexyl-6,7-dihydrodibenzo[c,f] [1,5]azastibocin-12(5H)-yl nitrate ( 2 ) was synthesized and systematically characterized by techniques such as NMR spectra, TG-DSC, and X-ray diffraction. It was found that the complex 2 exhibits relatively strong Lewis acidity (3.3 < Ho ≤ 4.8) and could be employed as a water tolerant Lewis acid catalyst for the synthesis of synthetically valuable benzimidazole derivatives starting from aldehydes and arylenediamines. This catalytic system shows excellent tolerance toward a wide variety of functional groups, such as methyl, methoxyl, fluoro, chloro, bromo, nitro, cyan, trifluoromethyl, 1-naphthaldehyde, furfural and n-butyl, together with facile reusability in 5 times scale enlarged synthesis.     

Synthesis and characterization of silica-coated Fe3O4 nanoparticle@silylpropyl triethylammonium polyoxometalate as an organic–inorganic hybrid heterogeneous catalyst for the one-pot synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones

In this study, silica-coated Fe₃O₄ nanoparticle@silylpropyl triethylammonium polyoxometalate catalyst was fabricated and characterized using atomic absorption, inductively coupled plasma optical emission spectrometry, elemental analysis, thermogravimetric analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and vibrating sample magnetometry analyses. The activity of this catalyst was examined in the synthesis of tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones. The bonding of the polyoxometalate to the surface of the nanoparticles exhibited excellent catalytic activity in this synthesis. Besides, the catalyst showed good reusability and recovery from the reaction mixture. Tetrahydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones were synthesized in high yields in the presence of inexpensive supported solid acid catalysts under classical heating conditions.     

Purification of hyaluronidase as an anticancer agent inhibiting CD44

Hyaluronidase (Hyal) can be employed to accomplish a diversity of complications related to hyaluronic acid (HA). Hyal contains some classes of catalysts that cleave HA. This enzyme is detected in several human tissues as well as in animal venoms, pathogenic organisms and cancers. Destructive cancer cells regularly increase the CD44 receptor existing in a cell membrane. This receptor acts as an exact receptor for HA, and HA is recognized to motivate the migration, spread, attack and metastasis of cancer cells. Nearly all of the methods used to purify Hyal are highly costly and not proper for industrial applications. This survey aims to review different methods of Hyal purification, which acts as an anticancer agent by degrading HA in tissues and thus inhibiting the CD44–HA interaction. Hyal can be successfully employed in the management of cancer, which is associated with HA–CD44. This review has described different methods for Hyal purification to prepare an origin to develop a novel purification technique for this highly appreciated protein. Using multiple columns is not applicable for the purification of Hyal and thus cannot be used at the industrial level. It is better to use affinity chromatography of anti-Hyal for Hyal with one-step purification.     

Role of anti-inflammatory interventions in high-fat-diet-induced obesity

Lipotoxicity is defined as deposition of excess fat associated with an inflammatory response. Metabolomic analysis of fatty acids (FAs) can be a marker of silent inflammation. ω3-Enriched diet, celecoxib, and safranal may have a protective anti-inflammatory role. In this work, total FAs extracted from red blood cells and arachidonic acid-to-eicosapentaenoic acid (AA-to-EPA) ratios were assessed using GC–MS assay in single-ion monitoring mode. The study was conducted on 64 male rats divided into eight groups: I, controls; II, rats received high-fat diet (HFD), III, rats received ω-6-enriched HFD; IV, rats received ω-3-enriched HFD; V, rats received celecoxib with HFD; VI, rats received safranal with HFD; VII and VIII, rats received celecoxib and safranal with ω-3 HFD, respectively. GC–MS Gas chromatography Mass spectrometry was performed for analysis of fatty acid methyl ester. Enzyme-linked immunosorbent assay was used to analyze serum interleukin-6 (IL-6) and transforming growth factor-beta 1 (TGF-β1) concentrations. A statistically significant decrease of AA-to-EPA ratio was observed in group VII when compared with the groups receiving HFDs. This group also showed the lowest serum IL-6 level and highest TGF-β1 level. In conclusion, ω3-enriched diet along with drugs (e.g. celecoxib) and herbal medications (e.g. safranal) may have an anti-inflammatory effect in lipotoxicity. GC–MS with single-ion monitoring is valid for the analysis of FAs.     

Efficient monooleoyl glycerol synthesis employing hybrid ultrasonic-infrared-wave promoted reactor: Concurrent catalytic and noncatalytic esterification kinetics

For the first time, intensification of monooleoyl glycerol (MOG) synthesis has been investigated in an ultrasonic-infrared-wave (USIRW) promoted batch reactor. Esterification of octadecanoic acid (ODA) with glycerol (Gl) has been conducted [using Amberlyst 36 wet catalyst] in three different reactors, namely traditional batch reactor (TBR), infrared wave promoted batch reactor (IRWPBR), and USIRW-promoted batch reactor (USIRWPBR) to assess the relative efficacy. The energy-efficient USIRWPBR remarkably intensifies the ODA-Gl esterification as manifested through superior ODA conversion (92.5 ± 1.25%) compared to that achieved in IRWPBR (79.8 ± 1.2%) and TBR (36.39 ± 1.25%). The most favorable reaction condition for optimum ODA conversion and maximum MOG yield was identified through statistical optimization over a selected parametric range, namely 3-5 Gl/ODA mole ratio, 0.004-0.006 g/mL Amberlyst 36 catalyst concentration, 300-700 rpm impeller speed, and 333-353 K reaction temperature. The present study also reports the formulation and validation of an innovative reaction kinetics, that is, concurrent noncatalytic and heterogeneously catalyzed (CNCHC) reaction mechanism in addition to the conventional heterogeneous kinetic models (LH and Eley-Rideal mechanisms). Under combined USIRW, the CNCHC esterification mechanism could best describe ODA-Gl esterification (R² = 0.98) compared to LH (R² = 0.97) and Eley-Rideal (R² = 0.88) mechanisms. The optimal product (MOG) was characterized by differential scanning calorimetry and thermogravimetric analysis to assess its crystallization property and thermal stability for possible application as plasticizer/fuel additives.     

Kinetic modeling of liquid-phase esterification of acetic acid with n-butanol using heterogeneous poly(o-methylene p-toluene sulfonic acid) as catalyst

Liquid-phase esterification of acetic acid with n-butanol to n-butyl acetate is studied in the presence of a polymeric catalyst, that is, poly(o-methylene p-toluene sulfonic acid). The performance of the proposed catalyst is compared with the other commercially available homogeneous and heterogeneous catalysts in terms of its activity. Experiments are conducted in an isothermal stirred batch reactor to study the effects of speed of agitation, temperature, and catalyst loading on the rate of reaction. A concentration-based pseudo-homogeneous (PH) kinetic model and activity-based kinetic models such as PH, Eley-Rideal (ER), and Langmuir-Hinselwood-Hougen-Watson (LHHW) models are developed. All the models considered in this study resulted in similar percentage deviation close to 4%. Further, kinetic models are validated through additional experiments, and it is observed that the simple concentration-based PH model is able to predict experimental data with least deviation compared to activity-based PH, ER, and LHHW models. The developed kinetic models are also tested using the Fisher-Snedecor test (F-test) and are found to be acceptable. By incorporating both modeling data and validation data, the overall absolute average deviations of different models are found to be concentration-based PH model 4.354%, activity-based PH model 5.006%, ER I model 5.189%, ER II model 5.403%, ER III model 5.437%, and LHHW model 6.104%, illustrating the superiority of the simple concentration-based PH model.     

Sulfonated poly(ether ether ketone) composite membranes based on amino-modified halloysite nanotubes that effectively immobilize phosphotungstic acid

In this work, we prepared amino-modified halloysite nanotubes (PEI-DHNTs) via the co-deposition of self-polymerized dopamine and polyethylenimine (PEI) on the surface of nanotubes, which was confirmed by X-ray photoelectron spectroscopy (XPS) and Thermogravimetric analysis (TGA). A series of composite proton exchange membranes (PEMs) were prepared by incorporating PEI-DHNTs and phosphotungstic acid (HPW) into sulfonated poly(ether ether ketone) (SPEEK). It was found that both PEI-DHNTs and HPW were well dispersed in the polymer matrix, exhibiting excellent filler-matrix compatibility. The composite membranes demonstrated enhanced proton conductivity, reaching as high as 0.078 S cm⁻¹ with 33.3 wt.% HPW loading, which was ~90% higher than that of SPEEK control membrane. Such improvement was mainly attributed to the strong acid–base pairs formed by PEI-DHNT with both SPEEK and HPW, which shortened proton hopping distance and created more continuous proton conduction pathways. Furthermore, the membrane conductivity remained almost constant after 1 year's immersion in liquid water, indicating the successful immobilization of HPW in the composite membranes.